Adjustable Mud Ring UL Listed From One Gang to Three Gang

Basic Info

Model NO.	adj55
Scope	3/4to1-1/2
Screw Size	6-32
Transport Package	Carton
Specification	4"*4"*1-1/2"/2-1/8"
Trademark	AXWILL
Origin	China
HS Code	857100000
Production Capacity	300000meters/Mounth

Product Description

Adjustable Mud Ring UL Applicating

• Rugged welded design does not fall apart during construction.
• Available from one to six gang configurations in both 2-1/2" and 3-1/2" depths.
• Rectangular shape fits square cuts in block.
• Large volume design allows for additional work room inside the box.
• Standard 1/2" and 3/4" concentric knockouts.
• Device ears inside the box prevent mortar from getting in the device holes.
• Steel voltage partition #971 fits all 2-1/2" or 3-1/2" depths.
• Standard wall plates can be used.
• Device ears are formed inside the box
• Rectangular shape neatly fits square cuts in concrete block, 3-3/4 in. x 5-19/32 in
• 47.8 cu. in. capacity
• UL listed

Actual Depth	3.578 in
Cubic Capacity	89.8 cu.in
Depth	3.5 in
Raised Ground	No

1gang Masonry Box, NonGangable, 3-1/2 in. Deep, Conduit KO's, Welded

• Integral brackets securely hold box to concrete block from front and back in masonry block walls, even in irregular openings
• TKO® Knockouts allow for design and installation flexibility
• Suppied with ten 1/2-3/4 in.TKO® knockouts
• Quick and accurate positioning
• Break off front tabs
• Non-gangable
• 22.5 cu. in. capacity
• Acceptable for use in 2-hour fire rated walls

4-Gang Masonry Box, NonGangable, 3-1/2 in. Deep, Conduit KO's, Welded

• Integral brackets securely hold box to concrete block from front and back in masonry block walls, even in irregular openings
• Supplied with twenty-four 1/2-3/4 in. concentric knockouts
• Quick and accurate positioning
• Break off front tabs
• Non-gangable
• 89.8 cu. in. capacity
• Acceptable for use in 2-hour fire rated walls

 

Descriptions of electrical outlet box

1) Using for EMT conduit cover for octangular / square / rectangle box.

2) All using automatic punching machine & molds, precise for each products.

3) K.O.S can make mixed size or only one size.

4) C/O cover and screws. Can make the bottom side hole as the terminal hole

5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm.

Certifications

Company Profile

1
Q: What kind of material you can offer?
A:

Designed for use with rigid/IMC and EMT conduit, these 5" steel boxes are suitable for audio, video, data and power applications in healthcare, education, commercial and government facilities.

Design features

• Large cubic capacity: 67 cubic inches
• Various knockout combinations and grounding terminations
• Application-specific color options are available - red (fire signal applications) and blue (telecommunications)
• 5" square series adapter plate (AX5CP) accommodates the use of readily available 4" square box covers, mud rings and tile rings

5-Gang Box, Welded, 2-1/2 in. Deep, Eight 3/4 & 1 in. Concentric KO's, Six 1/2 in. KO's, and Ten 3/4 in. KO's

• Gang boxes save time in installation, no need to gang boxes together.
• Have 3/4" and 1" concentric KO's for use with a wide variety of wiring methods.
• Bottom KO pattern, 3-1/2" and 2-3/4" at either end of box.
• Accepts two styles of covers, flat and 3/4" raised device cover.
• Use low voltage partitions #947 or #949.

0.8mm wall thick	1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.0mm wall thick	1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.2mm wall thick	1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.5mm wall thick	1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL

Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized Telescoping 1/2"D

Electrical 1.60mm Cover Conduit Junction Box Pre Galvanized One Two Gang 5/8" Deep

Electrical Conduit Box Cover Heavy Duty 1.60mm Cover With Screws

Ruff-IN Plate Brackets & Wall stud

Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized One Two Gang 1/2" Deep

Increase strength and rigidity help withstand the stress of stress of drywall installation

Assemblies shipped with box installed on left side of brackets, unless othersie specified

The wall stud improved far-side support stands up during drywall,installation and out performs competitor brackets

16" STUD SPACING	come with stop plate
24" STUD SPACING	sleeve extender
Self Adjustable Pre-fab Ring	protective plate box plate

Installation steps:

1. Install Bar hangers on ceiling joists or wall studs by screws.
2. Take off screw from stud on bar hanger, installs in 1/2" knockouts located on the bottom of boxes.
3. All above 5 Bar hangers are installed with metallic boxes on wall studs or ceiling joists.
4. When intended to support a fixture/luminaire in a wall, load capacity is 6 kg (13 Ib).

Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12"to 24" above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.

Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4", 4-11/16" or 6"square conduit boxes in stud walls.

Application: This box mounting bracket is used to support electrical box mounted to wood studs.

They screw directly to the face of wood studs.

Pre-Fab RUFF-IN products leave all the troubles in our factory, to efficiantly and save time for the end user.

 

Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.

 

Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand

Packaging & Delivery

Packaging Details
1. Skin Packing each products/master ctn
2. Inner ctn,master ctn
3. Each piece one plastic package,master ctn
Port
Shanghai/Ningbo
Lead Time:
20-30 days.

1. Pictures of emt conduit box

2. Descriptions of emt conduit box

1) Using for EMT conduit cover for octangular / square / rectangle box.

2) All using automatic punching machine & molds, precise for each products.

3) K.O.S can make mixed size or only one size.

4) C/O cover and screws. Can make the bottom side hole as the terminal hole

5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm.